Enersol ISO 594 Unscrewing Torque Test Machine

NOTE:
ISO 594 has been rescinded and replaced by ISO 80369-7. Because of the change from ISO 594 into ISO 80369-7; all tests per ISO 594 should now be switched to tests per ISO 80369-7 (ISO 80369-20).

NOTE:
Enersol Model S19 Unscrewing Torque Test Machine was specifically designed for ISO 594. Enersol Model S19 Unscrewing Torque Test Machine has been discontinued and replaced with the Enersol Model S19A Unscrewing Torque Device. Enersol Model S19A Unscrewing Torque Device has been designed specifically for ISO 80369 tests as listed in ISO 80369-20. Enersol Model S19A Unscrewing Torque Device is backward compatible to ISO 594. Enersol Model S19 Unscrewing Torque Test Machine can be adapted to work with ISO 80369-20.

NOTE:
Contact us if you own Enersol Model S19 Unscrewing Torque Test Machine and wish it upgraded to work with both ISO 594 and ISO 80369-20. To accomplish we will work with you to get the Enersol Model S19 Unscrewing Torque Test Machine returned Enersol. Enersol will make the appropriate modifications and return the upgraded device to you.

Disclaimer
This data is provided for general information only. The intention is to provide accurate information; regardless; errors may exist in the supplied information. If accuracy is critical, base your final decisions on the data provided in the root documents which are usually copyrighted documents. To purchase a copy of an engineering document visit an Authorized Reseller.

Comments:
Original Posting: 5/11/2013
Last Revision: 10/30/2017
Error corrections in, or comments about, the above data can be sent to: office@gagecrib.com