Enersol S18A Separation Force Test Machine

NOTE:
ISO 594 has been rescinded and replaced by ISO 80369-7. Because of the change from ISO 594 into ISO 80369-7; all tests per ISO 594/1 and ISO 594-2 should now be switched to tests per ISO 80369-7 (ISO 80369-20).

NOTE:
Enersol Model S18A Seperation Force Device, has been replaced by S18B Seperation Force Device.

NOIF YOUR COMPANY OWNS THE S18 or S18A:
Your existing machine can be upgraded.
Contact our sales department for a quotation.

Separation Force Test Machine
The simple to use Enersol Separation Force Test Machine is made from anodized aluminum, hardened steel and plastic.The Separation Force Test Machine is designed to use a specialized low friction pneumatic cylinder that raises and lowers the sample under test. The Separation Force Test Machine is designed to apply a force of 25N and 35N to the sample under test and comes with a separable weight (25N + 10N).

The Separation Force Tester is required for tests such as those in ISO594-1 and ISO594-2. Other standards such as the ISO7864, ISO7886 series (Parts 1- 4) and ISO8537 also require the Separation Force Test Machine by way of requiring components of the test samples to comply with the clauses in ISO594-1 or ISO594-2.

Uses for the Separation Force Test Machine
Below is a list of tests which are best accomplished by using the Separation Force Test Machine.

ISO 594/1 Separation Force Test as defined in paragraph 4.4
To conduct the Separation Force Test found in ISO 594/1 paragraph 4.4 the following Enersol products are required:
S11 - Male Reference Fitting ISO594/1 Figure 5 and/or
S12 - Female Reference Fitting ISO594/1 Figure 4
S15 - Force/Torque Fitting Assembly Machine
S18 - Separation Force Test Machine

ISO 594/2 Separation Force Test as defined in paragraph 4.3
To conduct the Separation Force Test found in ISO 594/2 paragraph 4.3 the following Enersol products are required:
S08 - Male Reference Fitting ISO594/2 Figure 5 and/or
S10 - Female Reference Fitting ISO594/2 Figure 7
S15 - Force/Torque Fitting Assembly Machine
S18 - Separation Force Test Machine

Disclaimer
This data is provided for general information only. The intention is to provide accurate information; regardless; errors may exist in the supplied information. If accuracy is critical, base your final decisions on the data provided in the root documents which are usually copyrighted documents. To purchase a copy of an engineering document visit an Authorized Reseller.

Comments:
Original Posting: 5/11/2013
Last Revision: 2/27/2020
Error corrections in, or comments about, the above data can be sent to: gageguy@gagecrib.com